dmesg - AMD R9 380 - AMD A10 APU - 8GB - Archlinux

Return To AMD R9 380 - AMD A10 APU - 8GB - Archlinux System Information

Linux version 4.15.0-1-MANJARO (builduser@manjaro) (gcc version 7.2.1 20180116 (GCC)) #1 SMP PREEMPT Mon Jan 29 06:13:26 UTC 2018
random: get_random_u32 called from bsp_init_amd+0x1d9/0x220 with crng_init=0
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bb9e6fff] usable
BIOS-e820: [mem 0x00000000bb9e7000-0x00000000bba16fff] reserved
BIOS-e820: [mem 0x00000000bba17000-0x00000000bbcd7fff] usable
BIOS-e820: [mem 0x00000000bbcd8000-0x00000000bbd8ffff] ACPI NVS
BIOS-e820: [mem 0x00000000bbd90000-0x00000000be124fff] reserved
BIOS-e820: [mem 0x00000000be125000-0x00000000be125fff] usable
BIOS-e820: [mem 0x00000000be126000-0x00000000be32bfff] ACPI NVS
BIOS-e820: [mem 0x00000000be32c000-0x00000000be481fff] usable
BIOS-e820: [mem 0x00000000be482000-0x00000000bf02efff] reserved
BIOS-e820: [mem 0x00000000bf02f000-0x00000000bf071fff] usable
BIOS-e820: [mem 0x00000000bf072000-0x00000000bf7f0fff] reserved
BIOS-e820: [mem 0x00000000bf7f1000-0x00000000bf7fffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023effffff] usable
NX (Execute Disable) protection: active
random: fast init done
SMBIOS 2.7 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./FM2A88X Extreme4+, BIOS P2.50 04/09/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF write-through
  C0000-CFFFF write-protect
  D0000-E7FFF uncachable
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000BF800000 mask FFFFFF800000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 000000023f000000 aka 9200M
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd9f0-0x000fd9ff] mapped at [        (ptrval)]
Scanning 1 areas for low memory corruption
Base memory trampoline at [        (ptrval)] 98000 size 24576
Using GB pages for direct mapping
BRK [0x1463e000, 0x1463efff] PGTABLE
BRK [0x1463f000, 0x1463ffff] PGTABLE
BRK [0x14640000, 0x14640fff] PGTABLE
BRK [0x14641000, 0x14641fff] PGTABLE
BRK [0x14642000, 0x14642fff] PGTABLE
BRK [0x14643000, 0x14643fff] PGTABLE
BRK [0x14644000, 0x14644fff] PGTABLE
BRK [0x14645000, 0x14645fff] PGTABLE
BRK [0x14646000, 0x14646fff] PGTABLE
BRK [0x14647000, 0x14647fff] PGTABLE
BRK [0x14648000, 0x14648fff] PGTABLE
BRK [0x14649000, 0x14649fff] PGTABLE
RAMDISK: [mem 0x36f41000-0x37797fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BBD5C078 000074 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000BBD62258 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170831/tbfadt-658)
ACPI: DSDT 0x00000000BBD5C188 0060D0 (v02 ALASKA A M I    00000000 INTL 20051117)
ACPI: FACS 0x00000000BBD86080 000040
ACPI: APIC 0x00000000BBD62368 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x00000000BBD623E0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x00000000BBD62428 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
ACPI: HPET 0x00000000BBD62468 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
ACPI: AAFT 0x00000000BBD624A0 0002CC (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
ACPI: SSDT 0x00000000BBD62770 000B9C (v01 AMD    BANTRY   00000001 AMD  00000001)
ACPI: SSDT 0x00000000BBD63310 0004B7 (v02 AMD    BANTRY   00000001 MSFT 04000000)
ACPI: CRAT 0x00000000BBD637C8 000528 (v01 AMD    BANTRY   00000001 AMD  00000001)
ACPI: SSDT 0x00000000BBD63CF0 001115 (v01 AMD    CPMCMN   00000001 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023effffff]
NODE_DATA(0) allocated [mem 0x23effa000-0x23effdfff]
tsc: Fast TSC calibration using PIT
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000023effffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009dfff]
  node   0: [mem 0x0000000000100000-0x00000000bb9e6fff]
  node   0: [mem 0x00000000bba17000-0x00000000bbcd7fff]
  node   0: [mem 0x00000000be125000-0x00000000be125fff]
  node   0: [mem 0x00000000be32c000-0x00000000be481fff]
  node   0: [mem 0x00000000bf02f000-0x00000000bf071fff]
  node   0: [mem 0x00000000bf7f1000-0x00000000bf7fffff]
  node   0: [mem 0x0000000100000000-0x000000023effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000023effffff]
On node 0 totalpages: 2076142
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 11962 pages used for memmap
  DMA32 zone: 765521 pages, LIFO batch:31
  Normal zone: 20416 pages used for memmap
  Normal zone: 1306624 pages, LIFO batch:31
Reserved but unavailable: 99 pages
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbb9e7000-0xbba16fff]
PM: Registered nosave memory: [mem 0xbbcd8000-0xbbd8ffff]
PM: Registered nosave memory: [mem 0xbbd90000-0xbe124fff]
PM: Registered nosave memory: [mem 0xbe126000-0xbe32bfff]
PM: Registered nosave memory: [mem 0xbe482000-0xbf02efff]
PM: Registered nosave memory: [mem 0xbf072000-0xbf7f0fff]
PM: Registered nosave memory: [mem 0xbf800000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xff7fffff]
PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
e820: [mem 0xbf800000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 43 pages/cpu @        (ptrval) s139264 r8192 d28672 u524288
pcpu-alloc: s139264 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists, mobility grouping on.  Total pages: 2043679
Policy zone: Normal
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8075324K/8304568K available (10252K kernel code, 1173K rwdata, 2828K rodata, 1372K init, 992K bss, 229244K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 29474 entries in 116 pages
Preemptible hierarchical RCU implementation.
	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
	Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 8448, nr_irqs: 456, preallocated irqs: 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20170831
ACPI: 4 ACPI AML tables successfully acquired and loaded
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Fast TSC calibration using PIT
tsc: Detected 4092.512 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8188.06 BogoMIPS (lpj=13641706)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Spectre V2 mitigation: Mitigation: Full AMD retpoline
Spectre V2 mitigation: Filling RSB on context switch
Freeing SMP alternatives memory: 24K
smpboot: CPU0: AMD A10-6800K APU with Radeon(tm) HD Graphics (family: 0x15, model: 0x13, stepping: 0x1)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      6
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000003f
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (32753.26 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xbbcd8000-0xbbd8ffff] (753664 bytes)
PM: Registering ACPI NVS region [mem 0xbe126000-0xbe32bfff] (2121728 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time:  7:46:35, date: 02/14/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 8 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
pci 0000:00:02.0: enabling Extended Tags
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xff706000-0xff707fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.1: reg 0x10: [mem 0xff704000-0xff705fff 64bit]
pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io  0xf090-0xf097]
pci 0000:00:11.0: reg 0x14: [io  0xf080-0xf083]
pci 0000:00:11.0: reg 0x18: [io  0xf070-0xf077]
pci 0000:00:11.0: reg 0x1c: [io  0xf060-0xf063]
pci 0000:00:11.0: reg 0x20: [io  0xf050-0xf05f]
pci 0000:00:11.0: reg 0x24: [mem 0xff70d000-0xff70d7ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xff70c000-0xff70cfff]
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xff70b000-0xff70b0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xff70a000-0xff70afff]
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xff709000-0xff7090ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.1: [1022:780c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io  0xf040-0xf047]
pci 0000:00:14.1: reg 0x14: [io  0xf030-0xf033]
pci 0000:00:14.1: reg 0x18: [io  0xf020-0xf027]
pci 0000:00:14.1: reg 0x1c: [io  0xf010-0xf013]
pci 0000:00:14.1: reg 0x20: [io  0xf000-0xf00f]
pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xff700000-0xff703fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xff708000-0xff708fff]
pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
pci 0000:00:15.0: enabling Extended Tags
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: PME# supported from D0 D3hot D3cold
pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
pci 0000:00:15.2: enabling Extended Tags
pci 0000:00:15.2: supports D1 D2
pci 0000:00:15.2: PME# supported from D0 D3hot D3cold
pci 0000:00:15.3: [1022:43a3] type 01 class 0x060400
pci 0000:00:15.3: enabling Extended Tags
pci 0000:00:15.3: supports D1 D2
pci 0000:00:15.3: PME# supported from D0 D3hot D3cold
pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
pci 0000:01:00.0: [1002:6939] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref]
pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x24: [mem 0xff600000-0xff63ffff]
pci 0000:01:00.0: reg 0x30: [mem 0xff640000-0xff65ffff pref]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:00.1: [1002:aad8] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xff660000-0xff663fff 64bit]
pci 0000:01:00.1: enabling Extended Tags
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xff600000-0xff6fffff]
pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0000-0x03af window] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
pci 0000:03:00.0: [14e4:43a9] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xff500000-0xff507fff 64bit]
pci 0000:03:00.0: enabling Extended Tags
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:15.0: PCI bridge to [bus 03]
pci 0000:00:15.0:   bridge window [mem 0xff500000-0xff5fffff]
pci 0000:04:00.0: [1b6f:7052] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xff400000-0xff407fff 64bit]
pci 0000:04:00.0: enabling Extended Tags
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.2: PCI bridge to [bus 04]
pci 0000:00:15.2:   bridge window [mem 0xff400000-0xff4fffff]
pci 0000:05:00.0: [1969:10a1] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xff300000-0xff33ffff 64bit]
pci 0000:05:00.0: reg 0x18: [io  0xd000-0xd07f]
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.3: PCI bridge to [bus 05]
pci 0000:00:15.3:   bridge window [io  0xd000-0xdfff]
pci 0000:00:15.3:   bridge window [mem 0xff300000-0xff3fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbb9e7000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbbcd8000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbe126000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbe482000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf072000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0x04c1cde0-0xbfffffff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io  0x0290-0x029f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io  0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [dma 0 disabled]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:08: [io  0x04d0-0x04d1] has been reserved
system 00:08: [io  0x040b] has been reserved
system 00:08: [io  0x04d6] has been reserved
system 00:08: [io  0x0c00-0x0c01] has been reserved
system 00:08: [io  0x0c14] has been reserved
system 00:08: [io  0x0c50-0x0c51] has been reserved
system 00:08: [io  0x0c52] has been reserved
system 00:08: [io  0x0c6c] has been reserved
system 00:08: [io  0x0c6f] has been reserved
system 00:08: [io  0x0cd0-0x0cd1] has been reserved
system 00:08: [io  0x0cd2-0x0cd3] has been reserved
system 00:08: [io  0x0cd4-0x0cd5] has been reserved
system 00:08: [io  0x0cd6-0x0cd7] has been reserved
system 00:08: [io  0x0cd8-0x0cdf] has been reserved
system 00:08: [io  0x0800-0x089f] has been reserved
system 00:08: [io  0x0b20-0x0b3f] has been reserved
system 00:08: [io  0x0900-0x090f] has been reserved
system 00:08: [io  0x0910-0x091f] has been reserved
system 00:08: [io  0xfe00-0xfefe] has been reserved
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:08: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:08: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:08: [mem 0xfed00000-0xfed00fff] could not be reserved
system 00:08: [mem 0xff800000-0xffffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xff600000-0xff6fffff]
pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 02]
pci 0000:00:15.0: PCI bridge to [bus 03]
pci 0000:00:15.0:   bridge window [mem 0xff500000-0xff5fffff]
pci 0000:00:15.2: PCI bridge to [bus 04]
pci 0000:00:15.2:   bridge window [mem 0xff400000-0xff4fffff]
pci 0000:00:15.3: PCI bridge to [bus 05]
pci 0000:00:15.3:   bridge window [io  0xd000-0xdfff]
pci 0000:00:15.3:   bridge window [mem 0xff300000-0xff3fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xff600000-0xff6fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref]
pci_bus 0000:02: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:02: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:02: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:02: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff window]
pci_bus 0000:03: resource 1 [mem 0xff500000-0xff5fffff]
pci_bus 0000:04: resource 1 [mem 0xff400000-0xff4fffff]
pci_bus 0000:05: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xff300000-0xff3fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:12.2: PME# does not work under D3, disabling it
pci 0000:00:13.2: PME# does not work under D3, disabling it
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:05:00.0: set MSI_INTX_DISABLE_BUG flag
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 8540K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb79e7000-0xbb9e7000] (64MB) mapped at [00000000e2e89ce2-00000000b0aec12f]
amd_uncore: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=41 max_order=21 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:02.0: Signaling PME with IRQ 24
pcieport 0000:00:15.0: Signaling PME with IRQ 25
pcieport 0000:00:15.2: Signaling PME with IRQ 26
pcieport 0000:00:15.3: Signaling PME with IRQ 27
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0x0000000043bb6bfc, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x06001119
microcode: CPU1: patch_level=0x06001119
microcode: CPU2: patch_level=0x06001119
microcode: CPU3: patch_level=0x06001119
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (830924878, 0)->(916762704, -85837826)
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Key type big_key registered
  Magic number: 6:4:774
mem zero: hash matches
rtc_cmos 00:05: setting system clock to 2018-02-14 07:46:36 UTC (1518594396)
Freeing unused kernel memory: 1372K
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 2016K
Freeing unused kernel memory: 1268K
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xff70b000
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
libata version 3.00 loaded.
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xff709000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
ohci-pci: OHCI PCI platform driver
xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 5
xhci_hcd 0000:00:10.1: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
pata_atiixp 0000:00:14.1: enabling device (0000 -> 0001)
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 7
xhci_hcd 0000:04:00.0: hcc params 0x040040a5 hci version 0x100 quirks 0x00000010
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8
usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 4 ports detected
scsi host0: pata_atiixp
scsi host1: pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0xa impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part sxs 
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xff70d000 port 0xff70d180 irq 39
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xff70d000 port 0xff70d280 irq 39
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 9
ohci-pci 0000:00:12.0: irq 18, io mem 0xff70c000
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 10
ohci-pci 0000:00:13.0: irq 18, io mem 0xff70a000
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 11
ohci-pci 0000:00:14.5: irq 18, io mem 0xff708000
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 2 ports detected
usb 7-1: new low-speed USB device number 2 using xhci_hcd
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: ATA-9: WDC WD10EZEX-00BN5A0, 01.01A01, max UDMA/133
ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: ATA-9: INTENSO SSD 128GB, O0213E, max UDMA/133
ata4.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      INTENSO SSD 128G 3E   PQ: 0 ANSI: 5
scsi 5:0:0:0: Direct-Access     ATA      WDC WD10EZEX-00B 1A01 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 5:0:0:0: [sdb] 4096-byte physical blocks
sd 5:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 3:0:0:0: [sda] Attached SCSI disk
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:15.2/0000:04:00.0/usb7/7-1/7-1:1.0/0003:045E:07F8.0001/input/input0
 sdb: sdb1 sdb2 sdb3
sd 5:0:0:0: [sdb] Attached SCSI disk
usb 9-4: new full-speed USB device number 2 using ohci-pci
hid-generic 0003:045E:07F8.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:04:00.0-1/input0
input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:15.2/0000:04:00.0/usb7/7-1/7-1:1.1/0003:045E:07F8.0002/input/input1
usb 7-2: new full-speed USB device number 3 using xhci_hcd
hid-generic 0003:045E:07F8.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:04:00.0-1/input1
usb 7-2: device descriptor read/64, error -71
tsc: Refined TSC clocksource calibration: 4092.557 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3afde762814, max_idle_ns: 440795215187 ns
PM: Starting manual resume from disk
PM: Image not found (code -22)
usb 7-2: device descriptor read/64, error -71
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 236 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd-fstab-generator[201]: Failed to create mount unit file /run/systemd/generator/tmp.mount, as it already exists. Duplicate entry in /etc/fstab?
systemd[197]: /usr/lib/systemd/system-generators/systemd-fstab-generator failed with error code 1.
usb 7-2: new full-speed USB device number 4 using xhci_hcd
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Login Prompts.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
EXT4-fs (sda1): re-mounted. Opts: discard
sd 3:0:0:0: Attached scsi generic sg0 type 0
sd 5:0:0:0: Attached scsi generic sg1 type 0
usb 7-2: device descriptor read/64, error -71
systemd-journald[214]: Received request to flush runtime journal from PID 1
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
acpi_cpufreq: overriding BIOS provided _PSD data
ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:02/LNXVIDEO:01/input/input4
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x780b, Revision ID: 0x16
sp5100_tco: I/O address 0x0cd6 already in use
input: PC Speaker as /devices/platform/pcspkr/input/input5
Linux agpgart interface v0.103
bcma: bus0: Found chip with id 43217, rev 0x01 and package 0x09
bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x27, class 0x0)
bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1E, class 0x0)
bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x14, class 0x0)
bcma: bus0: Bus registered
Adding 8705000k swap on /dev/sdb1.  Priority:-2 extents:1 across:8705000k FS
alx 0000:05:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [d0:50:99:1b:3f:13]
alx 0000:05:00.0 enp5s0: renamed from eth0
logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-4/input2
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
usb 7-2: device descriptor read/64, error -71
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input6
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input7
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0:    inputs:
snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
cfg80211: Loading compiled-in X.509 certificates for regulatory database
usb usb7-port2: attempt power cycle
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
cfg80211: failed to load regulatory.db
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
input: Logitech K400 Plus as /devices/pci0000:00/0000:00:12.0/usb9/9-4/9-4:1.2/0003:046D:C52B.0005/0003:046D:404D.0006/input/input18
logitech-hidpp-device 0003:046D:404D.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-0000:00:12.0-4:1
MCE: In-kernel MCE decoding enabled.
[drm] amdgpu kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel 
AMD IOMMUv2 functionality not available on this system
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
mousedev: PS/2 mouse device common for all mice
EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
Found CRAT image with size=1320
Parsing CRAT table with 1 nodes
Found CU entry in CRAT table with proximity_domain=0 caps=0
CU CPU: cores=4 id_base=16
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=17
Found cache entry in CRAT table with processor_id=18
Found cache entry in CRAT table with processor_id=18
Found cache entry in CRAT table with processor_id=18
Found cache entry in CRAT table with processor_id=19
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Creating topology SYSFS entries
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
fb: switching to amdgpudrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (TONGA 0x1002:0x6939 0x174B:0xE308 0xF1).
[drm] register mmio base: 0xFF600000
[drm] register mmio size: 262144
[drm] probing gen 2 caps for device 1022:1412 = 700d02/6
[drm] probing mlw for device 1022:1412 = 700d02
[drm] VCE enabled in physical mode
ATOM BIOS: 113-2E30810-O4B
[drm] GPU post is not needed
[drm] Changing default dispclk from 600Mhz to 625Mhz
[drm] vm size is 64 GB, block size is 13-bit, fragment size is 9-bit
amdgpu 0000:01:00.0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
amdgpu 0000:01:00.0: GTT: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 256bits GDDR5
[TTM] Zone  kernel: Available graphics memory: 4044272 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000F400040000).
amdgpu 0000:01:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
amdgpu: [powerplay] amdgpu: powerplay sw initialized
amdgpu 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000000400040, cpu addr 0x000000001c6c32f6
amdgpu 0000:01:00.0: fence driver on ring 1 use gpu addr 0x00000000004000c0, cpu addr 0x00000000b480bfb0
amdgpu 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000000400140, cpu addr 0x000000003fa9d7b0
amdgpu 0000:01:00.0: fence driver on ring 3 use gpu addr 0x00000000004001c0, cpu addr 0x000000006e9a54d2
amdgpu 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000000400240, cpu addr 0x00000000ff4eb25c
amdgpu 0000:01:00.0: fence driver on ring 5 use gpu addr 0x00000000004002c0, cpu addr 0x00000000fd0c97dc
amdgpu 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000000400340, cpu addr 0x0000000020594ece
amdgpu 0000:01:00.0: fence driver on ring 7 use gpu addr 0x00000000004003c0, cpu addr 0x000000000aacb9f8
amdgpu 0000:01:00.0: fence driver on ring 8 use gpu addr 0x0000000000400440, cpu addr 0x000000002d61ba25
amdgpu 0000:01:00.0: fence driver on ring 9 use gpu addr 0x00000000004004e0, cpu addr 0x000000001028955c
amdgpu 0000:01:00.0: fence driver on ring 10 use gpu addr 0x0000000000400560, cpu addr 0x00000000ba8d460c
amdgpu 0000:01:00.0: fence driver on ring 11 use gpu addr 0x00000000004005e0, cpu addr 0x000000004f2ddfba
[drm] Found UVD firmware Version: 1.65 Family ID: 10
amdgpu 0000:01:00.0: fence driver on ring 12 use gpu addr 0x000000f40035af40, cpu addr 0x0000000065530636
[drm] Found VCE firmware Version: 52.8 Binary ID: 3
amdgpu 0000:01:00.0: fence driver on ring 13 use gpu addr 0x00000000004006e0, cpu addr 0x000000005421ea30
amdgpu 0000:01:00.0: fence driver on ring 14 use gpu addr 0x0000000000400760, cpu addr 0x0000000077dcebe1
amdgpu 0000:01:00.0: fence driver on ring 15 use gpu addr 0x00000000004007e0, cpu addr 0x0000000036f2d001
b43-phy0: Broadcom 43217 WLAN found (core revision 30)
b43-phy0: Found PHY: Analog 9, Type 4 (N), Revision 17
b43-phy0: Found Radio: Manuf 0x17F, ID 0x2057, Revision 14, Version 0
Broadcom 43xx driver loaded [ Features: NLS ]
clocksource: Switched to clocksource tsc
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
b43 bcma0:1 wlp3s0b1: renamed from wlan0
[drm] DC: create_links: connectors_num: physical:4, virtual:0
[drm] Display Core initialized!
[drm] S22C350: [Block 0] 
[drm] S22C350: [Block 1] 
[drm] dc_link_detect: manufacturer_id = 2D4C, product_id = A32, serial_number = 30323931, manufacture_week = 31, manufacture_year = 23, display_name = S22C350, speaker_flag = 1, audio_mode_count = 1
[drm] dc_link_detect: mode number = 0, format_code = 1, channel_count = 1, sample_rate = 7, sample_size = 7
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] ring test on 0 succeeded in 14 usecs
[drm] ring test on 9 succeeded in 7 usecs
[drm] ring test on 1 succeeded in 15 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 4 usecs
[drm] ring test on 6 succeeded in 3 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] ring test on 8 succeeded in 3 usecs
[drm] ring test on 10 succeeded in 6 usecs
[drm] ring test on 11 succeeded in 5 usecs
[drm] ring test on 12 succeeded in 1 usecs
[drm] UVD initialized successfully.
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
random: crng init done
[drm] ring test on 13 succeeded in 18 usecs
[drm] ring test on 14 succeeded in 3 usecs
[drm] ring test on 15 succeeded in 3 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
[drm] ib test on ring 13 succeeded
[drm] fb mappable at 0xC0566000
[drm] vram apper at 0xC0000000
[drm] size 8294400
[drm] fb depth is 24
[drm]    pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
[drm] {1920x1080, 2200x1125@148500Khz}
Console: switching to colour frame buffer device 240x67
amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
amdgpu 0000:01:00.0: kfd not supported on this ASIC
[drm] Initialized amdgpu 3.23.0 20150101 for 0000:01:00.0 on minor 0
usb 7-2: new full-speed USB device number 5 using xhci_hcd
usb 7-2: Device not responding to setup address.
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0b1: link is not ready
usb 7-2: Device not responding to setup address.
usb 7-2: device not accepting address 5, error -71
usb 7-2: new full-speed USB device number 6 using xhci_hcd
usb 7-2: Device not responding to setup address.
alx 0000:05:00.0 enp5s0: NIC Up: 100 Mbps Full
IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
usb 7-2: Device not responding to setup address.
usb 7-2: device not accepting address 6, error -71
usb usb7-port2: unable to enumerate USB device
usb 7-4: new full-speed USB device number 7 using xhci_hcd
input: Holtek USB Gaming Mouse as /devices/pci0000:00/0000:00:15.2/0000:04:00.0/usb7/7-4/7-4:1.0/0003:04D9:A067.0007/input/input19
holtek_mouse 0003:04D9:A067.0007: input,hidraw4: USB HID v1.10 Keyboard [Holtek USB Gaming Mouse] on usb-0000:04:00.0-4/input0
holtek_mouse 0003:04D9:A067.0008: Fixing up report descriptor
input: Holtek USB Gaming Mouse as /devices/pci0000:00/0000:00:15.2/0000:04:00.0/usb7/7-4/7-4:1.1/0003:04D9:A067.0008/input/input20
holtek_mouse 0003:04D9:A067.0008: input,hiddev1,hidraw5: USB HID v1.10 Mouse [Holtek USB Gaming Mouse] on usb-0000:04:00.0-4/input1
holtek_mouse 0003:04D9:A067.0009: hiddev2,hidraw6: USB HID v1.10 Device [Holtek USB Gaming Mouse] on usb-0000:04:00.0-4/input2
fuse init (API version 7.26)
rfkill: input handler disabled
amdgpu 0000:01:00.0: swiotlb buffer is full (sz: 2097152 bytes)
swiotlb: coherent allocation failed for device 0000:01:00.0 size=2097152
CPU: 0 PID: 746 Comm: gnome-shell Not tainted 4.15.0-1-MANJARO #1
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./FM2A88X Extreme4+, BIOS P2.50 04/09/2015
Call Trace:
 dump_stack+0x5c/0x85
 swiotlb_alloc_coherent+0xe0/0x150
 ttm_dma_pool_get_pages+0x1f3/0x5c0 [ttm]
 ttm_dma_populate+0x24d/0x340 [ttm]
 ttm_tt_bind+0x29/0x60 [ttm]
 ttm_bo_handle_move_mem+0x5da/0x610 [ttm]
 ttm_bo_validate+0x135/0x150 [ttm]
 ? drm_rect_clip_scaled+0xf1/0x160 [drm]
 ttm_bo_init_reserved+0x38f/0x430 [ttm]
 amdgpu_bo_do_create+0x1b0/0x420 [amdgpu]
 ? amdgpu_fill_buffer+0x310/0x310 [amdgpu]
 ? __switch_to_asm+0x34/0x70
 amdgpu_bo_create+0x50/0x270 [amdgpu]
 ? __switch_to_asm+0x40/0x70
 ? __switch_to_asm+0x34/0x70
 amdgpu_gem_object_create+0x7f/0x110 [amdgpu]
 ? amdgpu_gem_object_close+0x1e0/0x1e0 [amdgpu]
 amdgpu_gem_create_ioctl+0x1d9/0x270 [amdgpu]
 ? futex_wait+0x219/0x240
 ? amdgpu_gem_object_close+0x1e0/0x1e0 [amdgpu]
 drm_ioctl_kernel+0x5b/0xb0 [drm]
 drm_ioctl+0x2d5/0x370 [drm]
 ? amdgpu_gem_object_close+0x1e0/0x1e0 [amdgpu]
 amdgpu_drm_ioctl+0x49/0x80 [amdgpu]
 do_vfs_ioctl+0xa4/0x630
 ? SyS_futex+0x12d/0x180
 SyS_ioctl+0x74/0x80
 entry_SYSCALL_64_fastpath+0x20/0x83
RIP: 0033:0x7fdfba964d87
RSP: 002b:00007ffcbe829b48 EFLAGS: 00000246
amdgpu 0000:01:00.0: swiotlb buffer is full (sz: 2097152 bytes)
swiotlb: coherent allocation failed for device 0000:01:00.0 size=2097152
CPU: 1 PID: 5125 Comm: Quake3-UrT.x86_ Not tainted 4.15.0-1-MANJARO #1
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./FM2A88X Extreme4+, BIOS P2.50 04/09/2015
Call Trace:
 dump_stack+0x5c/0x85
 swiotlb_alloc_coherent+0xe0/0x150
 ttm_dma_pool_get_pages+0x1f3/0x5c0 [ttm]
 ttm_dma_populate+0x24d/0x340 [ttm]
 ttm_tt_bind+0x29/0x60 [ttm]
 ttm_bo_handle_move_mem+0x5da/0x610 [ttm]
 ttm_bo_validate+0x135/0x150 [ttm]
 ? drm_rect_clip_scaled+0xf1/0x160 [drm]
 ttm_bo_init_reserved+0x38f/0x430 [ttm]
 amdgpu_bo_do_create+0x1b0/0x420 [amdgpu]
 ? amdgpu_fill_buffer+0x310/0x310 [amdgpu]
 ? __switch_to_asm+0x34/0x70
 amdgpu_bo_create+0x50/0x270 [amdgpu]
 ? __switch_to_asm+0x40/0x70
 ? __switch_to_asm+0x34/0x70
 amdgpu_gem_object_create+0x7f/0x110 [amdgpu]
 ? amdgpu_gem_object_close+0x1e0/0x1e0 [amdgpu]
 amdgpu_gem_create_ioctl+0x1d9/0x270 [amdgpu]
 ? futex_wait+0x219/0x240
 ? amdgpu_gem_object_close+0x1e0/0x1e0 [amdgpu]
 drm_ioctl_kernel+0x5b/0xb0 [drm]
 drm_ioctl+0x2d5/0x370 [drm]
 ? amdgpu_gem_object_close+0x1e0/0x1e0 [amdgpu]
 ? __switch_to_asm+0x40/0x70
 ? __switch_to_asm+0x40/0x70
 ? __switch_to_asm+0x34/0x70
 ? __switch_to_asm+0x40/0x70
 ? __switch_to_asm+0x34/0x70
 ? __switch_to_asm+0x40/0x70
 amdgpu_drm_ioctl+0x49/0x80 [amdgpu]
 do_vfs_ioctl+0xa4/0x630
 ? __schedule+0x2a1/0x8b0
 SyS_ioctl+0x74/0x80
 ? exit_to_usermode_loop+0x4f/0xa0
 entry_SYSCALL_64_fastpath+0x20/0x83
RIP: 0033:0x7f9f50454d87
RSP: 002b:00007fffd88b42d8 EFLAGS: 00000246
amdgpu 0000:01:00.0: swiotlb buffer is full (sz: 2097152 bytes)
swiotlb: coherent allocation failed for device 0000:01:00.0 size=2097152
CPU: 1 PID: 8261 Comm: heaven_x64 Not tainted 4.15.0-1-MANJARO #1
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./FM2A88X Extreme4+, BIOS P2.50 04/09/2015
Call Trace:
 dump_stack+0x5c/0x85
 swiotlb_alloc_coherent+0xe0/0x150
 ttm_dma_pool_get_pages+0x1f3/0x5c0 [ttm]
 ttm_dma_populate+0x24d/0x340 [ttm]
 ttm_tt_bind+0x29/0x60 [ttm]
 ttm_bo_handle_move_mem+0x5da/0x610 [ttm]
 ttm_bo_validate+0x135/0x150 [ttm]
 ? drm_rect_clip_scaled+0xf1/0x160 [drm]
 ttm_bo_init_reserved+0x38f/0x430 [ttm]
 amdgpu_bo_do_create+0x1b0/0x420 [amdgpu]
 ? amdgpu_fill_buffer+0x310/0x310 [amdgpu]
 ? __switch_to_asm+0x34/0x70
 amdgpu_bo_create+0x50/0x270 [amdgpu]
 ? __switch_to_asm+0x40/0x70
 ? __switch_to_asm+0x34/0x70
 amdgpu_gem_object_create+0x7f/0x110 [amdgpu]
 ? amdgpu_gem_object_close+0x1e0/0x1e0 [amdgpu]
 amdgpu_gem_create_ioctl+0x1d9/0x270 [amdgpu]
 ? __switch_to_asm+0x40/0x70
 ? __switch_to_asm+0x34/0x70
 ? __switch_to_asm+0x40/0x70
 ? __switch_to_asm+0x34/0x70
 ? __switch_to_asm+0x40/0x70
 ? amdgpu_gem_object_close+0x1e0/0x1e0 [amdgpu]
 drm_ioctl_kernel+0x5b/0xb0 [drm]
 drm_ioctl+0x2d5/0x370 [drm]
 ? amdgpu_gem_object_close+0x1e0/0x1e0 [amdgpu]
 ? retint_kernel+0x1b/0x1d
 amdgpu_drm_ioctl+0x49/0x80 [amdgpu]
 do_vfs_ioctl+0xa4/0x630
 ? handle_mm_fault+0xb1/0x1f0
 SyS_ioctl+0x74/0x80
 entry_SYSCALL_64_fastpath+0x20/0x83
RIP: 0033:0x7f422f374d87

Return To AMD R9 380 - AMD A10 APU - 8GB - Archlinux System Information